Was this page helpful?

2.如何安裝wheezy版

    NextNAS for wheezy版 (未來的功能會以此版為主)
          1.已啟用服務wonderbox、transmission 、dropbear
          2.增加一個救援IP(192.168.168.168)
          3.可利用CVBS(AV端子)接螢幕作console登入
          4.kernel版本2.6.32-59,已支援UVC ,EXT4
          5.root密碼wb1234
          6.Wonderbox web UI => http://<NextNAS-ip>:8101  (預設帳/密=>admin)

    官方討論區:  http://forum.wonderbox.net.tw

    Wonderbox2.0 release !! (20131231)
    程式會自動更新,舊版無需重裝~
    1.WEB UI增加IPCAM/WEBCAM管理介面
    inst-02.jpg
    2.最新刷機改成用sh4twbox 0.9.2 網樂通萬用改機救援碟改機
           可參考 http://www.twpda.com/2013/09/sh4twbox-07.html
           線上刷機請輸入
                http://stwp26.cyberhood.net.tw/NextNAS/target.NexNAS-wheezy-sh4twbox092.tgz
    inst-01p.jpg

    注意事項:
    1.第一次刷機時最好手動format USB DOM,刪除partiton 2,3,4 然後新增一個partition 2
    2.partiton1改成FAT16
    3.再執行sh4twbox --> p2 進行安裝

                       


    PS.在此特別感謝
    Chia-Cheng Huang、林原志 、徐皓等開發團隊的幫忙... 

     

    註: 常有人問怎麼還要錢?(試用600 天)其實這版是FREE 的. 
           我們希望真的有在用的人在到期時,再來申請終身免費..
           當然如果你覺得功能很實用的話也可以贊助我們開發~謝謝!
           贊助方式請利用後台UI,直接點選
    '前往付費'

    Was this page helpful?
    標籤 (Edit tags)
    • No tags

    文件 2

    文件大小日期附件上傳者 
     inst-01p.jpg
    無描述
    108.16 KB11:45, 31 Dec 2013chark動作
     inst-02.jpg
    無描述
    50.88 KB11:45, 31 Dec 2013chark動作
    查看第15個(總63個)評論: 查看所有
    還是不成功耶, 其結果如下:
    target disk device(default:sda) : sda
    source file put on device or none (default:/dev/sdb1) : none
    NAS/target.NexNAS-wheezy-sh4twbox092.tgzo) : http://stwp26.cyberhood.net.tw/NexttNAS/target.NexNAS-wheezy-sh4twbox092.tgz
    Wed Jun 11 09:52:37 CST 2014 RED LED indicates installing...
    set to red
    Info: myfdisk sda del 1 0 0

    The number of cylinders for this disk is set to 5157.
    There is nothing wrong with that, but this is larger than 1024,
    and could in certain setups cause problems with:
    1) software that runs at boot time (e.g., old versions of LILO)
    2) booting and partitioning software from other OSs
    (e.g., DOS FDISK, OS/2 FDISK)

    Command (m for help): Partition number (1-4): Info: myfdisk sda del 2 0 0

    The number of cylinders for this disk is set to 5157.
    There is nothing wrong with that, but this is larger than 1024,
    and could in certain setups cause problems with:
    1) software that runs at boot time (e.g., old versions of LILO)
    2) booting and partitioning software from other OSs
    (e.g., DOS FDISK, OS/2 FDISK)

    Command (m for help): Partition number (1-4): Info: myfdisk sda new 1 fat16 32

    The number of cylinders for this disk is set to 5157.
    There is nothing wrong with that, but this is larger than 1024,
    and could in certain setups cause problems with:
    1) software that runs at boot time (e.g., old versions of LILO)
    2) booting and partitioning software from other OSs
    (e.g., DOS FDISK, OS/2 FDISK)

    Command (m for help): You must delete some partition and add an extended partiti
    on first

    Command (m for help): Info: myfdisk sda new 2 ext234 auto

    The number of cylinders for this disk is set to 5157.
    There is nothing wrong with that, but this is larger than 1024,
    and could in certain setups cause problems with:
    1) software that runs at boot time (e.g., old versions of LILO)
    2) booting and partitioning software from other OSs
    (e.g., DOS FDISK, OS/2 FDISK)

    Command (m for help): You must delete some partition and add an extended partiti
    on first

    Command (m for help): Info: Wed Jun 11 09:52:40 CST 2014 format /dev/sda2 ext4
    mke2fs 1.41.14 (22-Dec-2010)
    /dev/sda2 is mounted; will not make a filesystem here!
    09:52:40[1][email protected] ~ #
    發佈時間 09:57, 11 Jun 2014 ()
    你有按一下RESET鍵->進紅燈(代表由USB開機)
    df 一下看看
    發佈時間 10:11, 11 Jun 2014 ()
    按一下RESET鍵->進紅燈(代表由USB開機)
    開機後,df 的結果如下:
    10:38:44[0][email protected] ~ # df
    Filesystem 1K-blocks Used Available Use% Mounted on
    10:38:48[0][email protected] ~ #
    發佈時間 10:40, 11 Jun 2014 ()
    df是有按reset嗎?
    fdisk -l 看看!
    發佈時間 10:45, 11 Jun 2014 ()
    10:38:48[0][email protected] ~ # fdisk -l

    Disk /dev/sda: 1010 MB, 1010826752 bytes
    64 heads, 32 sectors/track, 963 cylinders
    Units = cylinders of 2048 * 512 = 1048576 bytes

    Device Boot Start End Blocks Id System
    /dev/sda1 1 360 368624 6 FAT16

    Disk /dev/sdb: 8027 MB, 8027897856 bytes
    160 heads, 19 sectors/track, 5157 cylinders
    Units = cylinders of 3040 * 512 = 1556480 bytes

    Device Boot Start End Blocks Id System
    /dev/sdb1 1 203 308550+ 83 Linux
    /dev/sdb2 204 406 308560 83 Linux
    /dev/sdb3 407 4546 6292800 83 Linux
    /dev/sdb4 4547 5139 901360 83 Linux
    10:46:06[0][email protected] ~ #
    發佈時間 10:46, 11 Jun 2014 ()
    你重刷一下
    1.先用fdisk /dev/sdb 將partition2,3,4刪除
    2.執行sh4twbox
    target disk device(default:sda) : sdb (確認Sdb是8G的USB DOM)
    source file put on device or none (default:/dev/sdb1) : none
    NAS/target.NexNAS-wheezy-sh4twbox092.tgzo) : http://stwp26.cyberhood.net.tw/NexttNAS/target.NexNAS-wheezy-sh4twbox092.tgz
    發佈時間 10:59, 11 Jun 2014 ()
    用fdisk /dev/sdb 將partition2,3,4刪除
    執行sh4twbox
    11:18:47[0][email protected] ~ # sh4twbox
    ===== Disk Partition Listing (fdisk -l) ===================

    Disk /dev/sda: 1010 MB, 1010826752 bytes
    64 heads, 32 sectors/track, 963 cylinders
    Units = cylinders of 2048 * 512 = 1048576 bytes

    Device Boot Start End Blocks Id System
    /dev/sda1 1 360 368624 6 FAT16

    Disk /dev/sdb: 8027 MB, 8027897856 bytes
    160 heads, 19 sectors/track, 5157 cylinders
    Units = cylinders of 3040 * 512 = 1556480 bytes

    Device Boot Start End Blocks Id System
    /dev/sdb1 1 203 308550+ 83 Linux
    ===========================================================
    Hostname:sh4twbox
    Uptime : 11:19:11 up 3 min, 1 users, load average: 0.26, 0.20, 0.09
    Free Mem:219 MB
    IP Addr :192.168.0.104 192.168.168.168
    boot from
    last command:
    root pts/0 192.168.0.105:57 Wed Jun 11 11:16 still logged in
    ===========================================================

    === sh4twbox v0.9.2 MENU ===
    1) Back to Shell (default)
    2) Set Time (Wed Jun 11 11:19:11 CST 2014)
    9) Reboot
    p2) format first two partitions and install sh4twbox or other OS
    p1) Replace one partition and install sh4twbox or other OS
    h) show more choice options
    ============ Please Enter Number:
    p2
    target disk device(default:sdb) : sdb
    source file put on device or none (default:/dev/sda1) : none
    source file or download URL (default:auto) : http://stwp26.cyberhood.net.tw/Next
    NAS/target.NexNAS-wheezy-sh4twbox092.tgz
    Wed Jun 11 11:20:17 CST 2014 RED LED indicates installing...
    set to red
    Info: myfdisk sdb del 1 0 0

    The number of cylinders for this disk is set to 5157.
    There is nothing wrong with that, but this is larger than 1024,
    and could in certain setups cause problems with:
    1) software that runs at boot time (e.g., old versions of LILO)
    2) booting and partitioning software from other OSs
    (e.g., DOS FDISK, OS/2 FDISK)

    Command (m for help): Selected partition 1

    Command (m for help): Info: myfdisk sdb del 2 0 0

    The number of cylinders for this disk is set to 5157.
    There is nothing wrong with that, but this is larger than 1024,
    and could in certain setups cause problems with:
    1) software that runs at boot time (e.g., old versions of LILO)
    2) booting and partitioning software from other OSs
    (e.g., DOS FDISK, OS/2 FDISK)

    Command (m for help): Selected partition 1

    Command (m for help): Info: myfdisk sdb new 1 fat16 32

    The number of cylinders for this disk is set to 5157.
    There is nothing wrong with that, but this is larger than 1024,
    and could in certain setups cause problems with:
    1) software that runs at boot time (e.g., old versions of LILO)
    2) booting and partitioning software from other OSs
    (e.g., DOS FDISK, OS/2 FDISK)

    Command (m for help): Command action
    e extended
    p primary partition (1-4)
    Info: myfdisk sdb new 2 ext234 auto

    The number of cylinders for this disk is set to 5157.
    There is nothing wrong with that, but this is larger than 1024,
    and could in certain setups cause problems with:
    1) software that runs at boot time (e.g., old versions of LILO)
    2) booting and partitioning software from other OSs
    (e.g., DOS FDISK, OS/2 FDISK)

    Command (m for help): Command action
    e extended
    p primary partition (1-4)
    Info: Wed Jun 11 11:20:19 CST 2014 format /dev/sdb2 ext4
    mke2fs 1.41.14 (22-Dec-2010)
    Could not stat /dev/sdb2 --- No such file or directory

    The device apparently does not exist; did you specify it correctly?
    11:20:19[1][email protected] ~ #
    發佈時間 11:23, 11 Jun 2014 ()
    fdisk -l 查一下目前partition
    發佈時間 13:06, 11 Jun 2014 ()
    17:23:24[0][email protected] ~ # fdisk -l

    Disk /dev/sda: 1010 MB, 1010826752 bytes
    64 heads, 32 sectors/track, 963 cylinders
    Units = cylinders of 2048 * 512 = 1048576 bytes

    Device Boot Start End Blocks Id System
    /dev/sda1 1 360 368624 6 FAT16

    Disk /dev/sdb: 8027 MB, 8027897856 bytes
    160 heads, 19 sectors/track, 5157 cylinders
    Units = cylinders of 3040 * 512 = 1556480 bytes

    Device Boot Start End Blocks Id System
    /dev/sdb1 1 203 308550+ 83 Linux
    17:23:33[0][email protected] ~ #
    發佈時間 17:24, 11 Jun 2014 ()
    請利用fdisk /dev/sdb新增一個新的partiton(編號為2),大小就是全部。
    應該是少了這個!!
    發佈時間 17:54, 11 Jun 2014 ()
    新增一個新的partiton後需要format 嗎? 怎麼將partition type 從Linux改成FAT16?
    發佈時間 17:58, 11 Jun 2014 ()
    直接刷機!
    程式會作~
    發佈時間 18:09, 11 Jun 2014 ()
    多謝大師,大功告成! 感激不盡!!
    發佈時間 18:33, 11 Jun 2014 ()
    你好
    我分割完之後
    再刷機時他出現了
    /dev/sdb2 is mounted; will not make a filesystem here!
    不知道這是麼樣的問題
    發佈時間 01:18, 9 Jul 2014 ()
    df
    看看目前的partition分佈~
    或重新開機重刷看看!
    發佈時間 11:20, 9 Jul 2014 ()
    查看第15個(總63個)評論: 查看所有
    您必須 登入 才能發佈評論。
    Powered by MindTouch Core